公司logo

Qingdao Kede Shengdi

The General Agent in China authorized by CORTEC

135-0535-2885
Advanced Search:
Information
新闻中心More

Service Hotline

135-0535-2885
VpCI coating

VpCI-389 Water-Based Removable Coating

市 场 价:¥0

优 惠 价:¥1

库  存:0

选择商品:
1
参数:

PRODUCT DESCRIPTION:

VpCI®-389 is a fast drying water-based removable coating that provides protection in harsh, outdoor, unsheltered applications. Provides multi- metal protection. Excellent UV resistance. Can be matched to some custom colors. Provides a dry, slightly tacky film.

Service Hotline:+86-0532-80989502,+86-135-0535-2885
E-Mail:zzgvci@163.com

商品详细

PACKAGING & STORAGE
VpCI®-389 is available in 5 gallon (19 L) pails, 55 gallon (208 L) metal drums, liquid totes, and bulk.
To ensure best product performance, store in original packaging, indoors, and out of direct sunlight at 40-100 oF (4-38 oC).
Shelf life: 2 years


CHARACTERISTICS/TECHNICAL DATA

Volume Solids

37.10%

Gloss (ASTM D532)

NA

VOCs (ASTM D3960)

0.1 lbs/gal (12 g/L)

Viscosity

5,500-10,000 Centipoise

Pencil Hardness (ASTM D3363)

NA

Spreading Rate

595 sq.ft/gal @ 1.0 mils DFT

(14.6 sq.m/L @ 25 μm)

Weight per Gallon

8.32 lbs/gal (1.00 kg/L)

Flash Point

201.2 °F (94 °C)

Recommended DFT

1.0-2.0 mils (25-50 μm)

Recommended WFT

2.7-5.4 mils (67.5-135 μm)

Dry to Touch

10-60 min

Dry to Handle

20-60 min

Recoat Time

NA

Force Dry

15-20 min @ 150 °F (65 °C)

Full Cure

3-7 days

Salt Spray (ASTM B117)

600 hrs

Humidity (ASTM D1748)

1000 hrs

Adhesion (ASTM D3359)

NA

Flexibility (ASTM D522)

½" mandrel (1.27 cm)

All tests performed after a 7 day cure at ambient temperature.


APPLICATION
Surface Preparation
Substrate should be free of grease, oil, dirt, fingerprints, drawing compounds, rust inhibitors (except Cortec® ap- proved), or any other surface contamination that could affect adhesion. For bare metal applications, Cortec® recommends a NACE #3/SSPC-SP6. Consult Cortec® Technical Service and/ or test system adhesion prior to full scale application.

Note: Make sure dew point is more than 5 °F (2 °C) less than air temperature for application. Power agitate to a uniform consistency using a “squirrel cage” type mixer, hand-held drill mixer, or other equivalent method. VpCI®-389 can be applied by spray, roll, brush, or dip.
Typical Equipment Setups HVLP / Conventional Spray
•Tip 0.02”-0.11” (0.5-2.8 mm) dependent upon pressures
and viscosity
•Air Pressure 45-55 psi
•Fluid Pressure 10 psi
•Fluid hose should be ⅜” (0.95 cm) I.D. with a maximum length of 50 feet (15.2 m). ¼” (0.64 cm) I.D. fluid hose can be used, but pressures may need to be adjusted. Pot should always have dual regulation and be kept at same elevation as spray gun.

Air Assisted Airless / Airless
•Tip 0.015”-0.035” (0.38-0.89 mm) dependent upon pres- sures and viscosity
•Pressure 1800-2500 psi
•Hose should be ⅜” (0.95 cm) I.D. minimum, but a ¼” (0.64 cm) I.D. whip end section may be used for ease of applica- tion. A maximum length of 100 feet (30.5 m) is suggested.

Cleanup
Clean tools/equipment immediately after use with water when coating is still wet. For removal of VpCI®-389 applied to a metal surface, use a VpCI®-41x Series alkaline cleaner/ degreaser. Follow mfg’s safety recommendations when using any solvent.




Qingdao Cortec Rust Proof Materials Co., Ltd.,               

Wechat QR code on the left side of the website

Qingdao Cortec Rust Proof Materials Co., Ltd.,

Consultation hotline:0532-80989502

Sales Hotline:135-0535-2885

E-mail:zzgvci@163.com

QQ:592192408

Address:Room 2073, No. 12, chongmingdao East Road, Qingdao Economic Development Zone

Alibaba store:https://shop1420649126784.1688.com


Procurement consulting:
Qingdao Cortec Rust Proof Materials Co., Ltd., the General Agent in China authorized by CORTEC Mobile phone:13505352885 Telephone:0532-80989502 Website:www.cortecchina.com Mailbox:zzgvci@163.com Alibaba shop link click on the entrance Address:Room 2073, No. 12, chongmingdao East Road, Qingdao Economic Development Zone
Anticorrosion Anticorrosion
Qingdao Cortec Rust Proof Materials Co., Ltd.,